Cleaning Mold With Vinegar And Baking Soda

Baking soda is used along with vinegar to kill various mold species. To eliminate mold, you must use distilled vinegar and pour that to a spray bottle without watering it. Spray vinegar to the moldy surface and leave that to sit for one hour.

 In fact, mold is a particular kind of fungus that consists of small organisms. You may find mold everywhere. Naturally, mold play an important role and it breaks down dead leaves, logs, and plants. Molds basically thrive on moisture as well as regenerate by means of lightweight and small spores, which travel through air.

The concern is that mold might be growing in your house and you might not be aware of it. That is due to the fact that mold grows in warm, humid, and dark places.

Common places that are most risk for bacteria and mold growth are your kitchen, basement, bathroom, and places that contact with moisture. When conditions are right, mold may grow within a day or two.

Leaving mold untreated may cause different respiratory illnesses and they’re a serious cause for allergies. That is the reason why it’s essential to clean mold once you noticed it.

Ways to Clean Mold Using Baking Soda and Vinegar

Use baking soda and vinegar respectively

Vinegar is basically a mild acid that may kill eighty-two percent of mold species. To eliminate mold using vinegar, you have to use vinegar and pour that to a spray bottle without watering it.

Spray vinegar to the mold surface and let it sit for about 60 minutes. Then, wipe the area clean using water and let the surface dry. The smell of vinegar will disappear within several hours.

Also, baking soda is mild and white mineral powder, which may be used for killing mold in your house. It’s safe for your pets and family. It will not just kill mold, but also baking soda would absorb moisture for keeping mold away.

For you to do this, you have to add a quarter of spoon of baking soda to spray water bottle and shake it until it’s dissolved.

Spray to the moldy surface with water and baking soda solution.

You must use scrub brush for eliminating mold from the surface. After that, you must rinse the surface with water to wash residual mold. Spray the affected area again and let it dry. It would kill any leftover mold and avoid mold from returning back.

Use Baking Soda and Vinegar Mixture

With the nature of both baking soda and vinegar, a mixture with both of these can increase the efficiency to clean mold. All you need to prepare is a mixing pot, scrubber, distilled vinegar, and baking soda.

First, you should mix baking soda with vinegar so it may form a paste. Then, you can use the toothbrush to cover with paste.

Scrub the moldy surface with toothbrush until mold is eliminated. Repeat the process until the mold has been cleaned off completely.

Using Other Methods to Clean Mold

Use An Air Purifier

It’s crucial to understand that mold basically grew for a reason at the first place. Because of environment conditions, mold continues to grow and to avoid infestation from developing, other ongoing changes and treatments might have to be made to your habits and home.

Take note that prevention is the best possible cure for mold growth. One thing that will help you release your stress for having mold in your house is using a big room air purifier.

The bottom line is that air purifiers might capture 99.97 percent of airborne pollutants like mold.

Consider Using Hydrogen Peroxide

For those who don’t know, hydrogen peroxide is an antibacterial and antifungal chemical, which kills mold effectively on different materials including walls, floors, bathroom, and kitchen appliances.

To prevent and remove mold, you should pour three percent of hydrogen peroxide concentration to the spray bottle. Spray your moldy area completely and leave it for ten minutes.

After that, you must scrub the area to eliminate all mold and some mold stains. You must also wipe the surface to help eliminate residual spores and mold.

Getting Rid of Mold with Baking Soda and Vinegar

While using vinegar and baking soda as individual solutions for removing mold from your house can be effective, combining these two can be an effective solution to deal with mold.

Toxic chemicals including bleach may be used for removing stubborn as well as serious mold infestations.

However, taking vinegar and baking soda can be a solution for lighter problems and safe for pets and children.

Benefits of Using Baking Soda and Vinegar for Cleaning Mold

There are numerous benefits of using baking soda and vinegar for cleaning mold and these include the following:

  • Non-toxic
  • Inexpensive
  • Natural fungicide
  • Simple to access
  • Pet and child-friendly
  • Eco-friendly and natural

Prevention is the Key

Once mold colony is treated, it’s essential to understand that it grew for some reasons at the first place. Mold grows because of environment conditions and to avoid infestation from developing, some ongoing changes and treatments may have to be made to your habits and home.

Take note that prevention can be the best cure for mold. So, take time to understand the reasons why mold happens and how you could prevent mold from occurring.

Now that you are knowledgeable of the ways to clean such areas, ensure to keep the humidity away if you do not like mold showing up again. Take note that it is what makes them growing and stay alive.

Stop any particular water leaks that you might have around and check relative humidity. If it is higher than 55 percent, dehumidifiers are recommended. This will help you enjoy a life that is free from mold.

Even if baking soda and vinegar are effective for cleaning mold, you must still use it properly to get the best results. In this way, you can be assured that you will be able to get rid of mold in a safe manner.